• OPENING TIMES

  • Weekdays 7:30 - 5:00
  • Saturdays 7:30 - 1:00
  • Trade & Public All Welcome

01142 310 909

EASYSeal Sandstone Sealer & Enhancer

Availability: In stock

Quick Overview

EasySeal Sandstone Sealer & Enhancer

EASYSeal Sandstone Sealer & Enhancer

Zoom Out
Zoom In

Put life into your patios, paths and driveways


A simple to use PROFESSIONAL GRADE water based, non-solvent, solution which enriches, boosts and enhances the natural colour of your Sandstone paving without giving it a false shiny finish. Whilst Sandstone Sealer and Enhancer has been design specifically for sandstone it is suitable for sealing and enhancing other types of natural stone. When looking to seal and enhancer slate or limestone we suggest you use our EASYSeal Slate and Limestone which has been designed for less porous stone.


The clever formulation is designed to give a constant, vibrant appearance all across the paving. As a bonus, EASYSeal Sandstone Sealer Enhancer also provides a good level of protection for the paving.


We've improved our Colour Enhancer from a 1 litre concentrate to a new ‘ready to use’ 5 litre formula.


It’s designed for Sandstone but also suitable for most types of natural stone.


The replacement product for Colour enhancer and it suitable for most types of natural stone


Note
Natural stone varies in levels of porosity, therefore on more porous stone or uneven surfaces the coverage will be less and more product will be required. For less porous stone, such as slate and limestone use our EASYSeal Slate and Limestone sealer and enhancer. EASYSeal Sandstone Sealer & Enhancer is for more porous natural stone.


Coverage: Up to 25m²


NoteNatural stone varies in levels of porosity, therefore on more porous stone the coverage will be less and more product will be required. Adding more coats will increase the effect and provide a higher level of protection. For even greater colour enrichment apply a 3rd coat before the 2nd is dry. Applying additional coats to the sandstone when the previous coat is completely dry may result in pooling and a patchy finish. Do not apply more than 3 coats. The final result will simply be an exaggeration of the natural stone colours in their natural state. The full curing process takes up to 24 hours – longer in cold conditions.

Hardcores have a range of vehicles to deliver goods to you on. The vehicles range from 7.5tn crane offload, to 18tn crane offload, to rear mounted moffet forklift trucks to articulated hiab offload. Be sure to know that whatever the delivery point Hardcores will do its upmost to get the goods as close and as safely as possible.